Nautel NV30LT-N, Operation & Maintenance Manual

Page: 134 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.116 VERSION 0.1 2015-03-01
Selecting FM Mask
NOTE
: FM Mask selection is only available using the front panel display.
From the front panel UI, you can select the appropriate FM mask standard (FCC, ETSI or None) being
used by the analyzer on the AUI. The selection affects the mask lines on the AUI’s Spectrum Analyzer
instrument. To view the
FM Mask
screen, select
User Settings -> FM Mask
from the
Main Menu
(see
Figure 3.2.97 ).
Figure 3.2.97: FM Mask Screen
Use the up and down buttons to toggle between
FCC FM Mask
,
ETSI FM Mask
and
No FM Mask
. The
factory setting is
FCC FM Mask
. Press the accept (checkmark) button to save the change. Press
cancel (
X
) to discard changes and return to the previous menu.