Nautel NV30LT-N, Operation & Maintenance Manual

Page: 123 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-03-01 PAGE 3.2.105
Setting the Clock
The NV30LT-N controller module’s internal clock uses an externally accessible backup battery, and
therefore maintains an accurate date and time, even during power outages. The date and time needs to
be set when the transmitter is first installed, or after a power outage if the backup battery has failed.
You can set the date and time using the remote AUI (see Setting the Clock - Using the AUI ) or using the
local front panel display (see Setting the Clock - Using the Front Panel, on page 3.2.107 ). If you change
the clock setting on the front panel UI, it will also be reflected on the remote AUI, and vice versa. If the
NTP feature is enabled (see
Enabling NTP, on page 3.2.108 ), the clock will set automatically and cannot
be manually adjusted.
Setting the Clock - Using the AUI
You can remotely set the NV30LT-N’s time and date using the AUI’s
Time Setup
page (see
Figure 3.2.88 ) by selecting
Time Setup
from the
User Settings
options. The date and time setting is
displayed in the upper, left corner of the AUI.
Figure 3.2.88: Time Setup Page