Nautel GV5, Operation & Maintenance Manual, Page: 157 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.140 VERSION 0.2 2014-07-23
Figure 3.2.121: Network Setup page
Network Setup - Using the Controller UI
From the controller’s UI, in local mode, you can set or change network settings. To view the
Network
Settings
screen, select
User Settings -> Network Settings
from the
Main Menu
. See Figure 3.2.122
on page 3.2.141 for details on setting each parameter.
Use the up and down buttons to move the cursor to the desired parameter and then press the right
button to enable editing of the setting. Within any of the editing screens, use the left and right buttons
to select a character for editing and then use the up and down buttons to edit a setting. Press the
accept (checkmark) button to save the change. Press the cancel (
X
) button to discard changes and
return to the previous menu.
NOTE:
A nameserver (also called a DNS) translates a host name (e.g., mail.nautel.com) to an IP address
such as in configuring email (see Email Configuration, on page 3.2.143 ).
If you are using a laptop to connect to the GV5/GV3.5, see Connecting a Laptop Directly to the
Transmitter, on page 3.2.142 .
All addresses
shown are for
reference
purposes only