Nautel GV5, Operation & Maintenance Manual, Page: 130 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.113
System Settings - using the Controller UI
You can perform the following functions using the
System Settings
menu of the controller UI:
 Resetting the Single-Board Computer (SBC) - see page 3.2.114
 Configuring SBC Watchdog - see page 3.2.114
 Updating Firmware - see page 3.2.115
 Adjusting Display Settings - see page 3.2.115
 Setting Exciter TCXO Offset - see page 3.2.117
 Optimizing HD Parameters - see page 3.2.118 l
 Configuring Installed Hardware - see page 3.2.120
 FM Polarity - see page 3.2.124
 Adjusting Factory Settings - see page 3.2.125
NOTE
: Changing values in the System Settings -> Factory Settings is not normally required, and should
only be performed by trained personnel. Information on some of these sub-menus is not included in the
manual. Contact Nautel for assistance.
WARNING! System settings are established at Nautel and should not
require any adjustment. Making changes to these settings may void your
warranty. Contact Nautel before making changes.