Nautel GV30N, Troubleshooting Manual

Page: 86 / 365

GV30N TROUBLESHOOTING MANUAL PARTS LISTS
PAGE 4.2.4 VERSION 0.1 2014-11-01
OEM Code to Manufacturers Cross-Reference
The OEM (CAGE) codes listed in the reference designation lists are representative of the original
equipment manufacturers of those parts. To determine a specific part's manufacturer contact
information, enter the five-character OEM (CAGE) code for that part in the following website:
https://www.bpn.gov/bincs/begin_search.asp
After entering the OEM (CAGE) code number, manufacturer pertinent information (address, telephone
number, fax number, etc.) will be displayed. Please contact Nautel if a part cannot be obtained (see also
“On-Line Part Quotes” in the Warranty section of this manual).
Manufacturers Index
For customers without web access, Table 4.2.1 on page 4.2.5 provides a cross-reference from the
original equipment manufacturer's (OEM) codes to the manufacturer's name. The listing is sorted
alphanumerically by the OEM code.
Common Abbreviations/Acronyms
The following abbreviations/acronyms may appear in the Description of Part column:
 SMT
Denotes item is designed to be installed using Surface Mount Technology.
 MTA
Denotes item is a Mass Termination Assembly connector.
 SIP
Single In-line Package
 DIP
Dual In-line Package
 IDC
Denotes item is an Insulation Displacement connector for ribbon cable.