Nautel GV30N, Troubleshooting Manual

Page: 84 / 365

GV30N TROUBLESHOOTING MANUAL PARTS LISTS
PAGE 4.2.2 VERSION 0.1 2014-11-01
When the Reference Designation is Known:
 Refer to the family tree depicted in Figure 4.2.1 on page 4.2.7 through Figure 4.2.3 on page 4.2.9
with the full reference designation.
 Follow the family tree branches to the block that represents the lowest level assembly assigned a
Nautel configuration control number. Then locate the part number index table for that Nautel
configuration control number.
 Locate the part's reference designation in the specified table.
Reference Designation Lists
Individual reference designation lists are provided for:
 assemblies that are assigned an alpha-prefixed Nautel nomenclature (e.g., NAA61B)
 cable harnesses that are assigned a numbered Nautel part (e.g., 219-8401-01)
 optional kits that are assigned a numbered Nautel part
To obtain the full reference designation for a specific part the Nautel configuration control number must
be located in the family tree (
Figure 4.2.1 on page 4.2.7 through Figure 4.2.3 on page 4.2.9 ) to include
the reference designation of all higher level assemblies. The reference designation lists, which are titled
and presented in alphanumeric order, are divided into columns to aid in locating specific information.
Column Content
The following paragraphs provide an explanation of the purpose and contents of each column in the
part number indexes.
Ref Des Column
The 'ref des' column contains the reference designation for a specific part. These designations are
assigned in accordance with the requirements of American National Standard Specification
ANSI Y32.16.