Nautel GV3.5, Operation & Maintenance Manual, Page: 192 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.175
Figure 3.2.150: Select a Remote (input) window
Configure Input Control Logic - AUI
You can configure the active/inactive control logic for each of the 10 digital inputs. Press the existing
Logic
bar to display the applicable drop-down menu options, which may include:

Rising Edge Turn On/Reset
. Logic ‘1’ (high or rising edge) activates the input (or causes a
reset, as appropriate).

Falling Edge Turn On/Reset
. Logic ‘0’ (low or trailing edge) activates the input (or causes a
reset, as appropriate).

Rising Edge Turn Off
. Logic ‘1’ (high or rising edge) de-activates the input.

Falling Edge Turn Off
. Logic ‘0’ (low or trailing edge) de-activates the input.

Falling Edge Toggle
. Logic ‘0’ (low or trailing edge) de-activates the input; next logic ‘0’ (low
or trailing edge) activates the input.

Rising Edge Toggle
. Logic ‘1’ (high or rising edge) activates the input; next logic ‘1’ (high or
rising edge) de-activates the input.

Rising Edge, Turn On. Falling Edge Turn Off
. Logic ‘1’ (high or rising edge) activates the
input; logic ‘0’ (low or trailing edge) de-activates the input.

Falling Edge, Turn On. Rising Edge Turn Off
. Logic ‘0’ (low or trailing edge) activates the
input; logic ‘1’ (high or rising edge) de-activates the input.

Active High, Increase/Turn On
. Logic ‘1’ (high) causes a power increase/activates preset.

Active Low, Increase
/
Turn On
. Logic ‘0’ (low) causes a power increase/activates preset.

Active High, Decrease
. Logic ‘1’ (high) causes a power decrease.

Active Low, Decrease
. Logic ‘0’ (low) causes a power decrease.
Press
Apply
to activate changes. Press
Cancel
to cancel changes.