Nautel GV3.5, Operation & Maintenance Manual, Page: 107 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.90 VERSION 0.2 2014-07-23
Figure 3.2.71: DI Code editing screens
Figure 3.2.72: AF Data editing screen
Use the up and down arrows to select ON or OFF, then press
the accept (checkmark) button to save the change. Press the
cancel (
X
) button to discard changes and return to the previ-
ous menu. The default selection is OFF.
Use the up and down arrows to select ON or OFF, then press
the accept (checkmark) button to save the change. Press the
cancel (
X ) button to discard changes and return to the previ-
ous menu. The default selection is OFF.
Use the up and down arrows to select Dynamic or Static, then
press the accept (checkmark) button to save the change.
Press the cancel (
X
) button to discard changes and return to
the previous menu. The default selection is Static.
Use the up and down arrows to select Stereo or Mono, then
press the accept (checkmark) button to save the change.
Press the cancel (
X
) button to discard changes and return to
the previous menu. The default selection is Mono.
Use the up and down arrows to select the number of alter-
nate frequencies (between 0 and 6), then press the accept
(checkmark) button to save the change. Press the cancel (
X )
button to discard changes and return to the previous menu.
The default number is 0.