Nautel GV20, Installation Manual

Page: 30 / 66

GV20/GV15 INSTALLATION MANUAL CONNECTING AC POWER
PAGE 2.5.4 VERSION 5.0 2021-03-01
Figure 2.5.1: Ac Mains and UPS Input Routing and Connections
**TOP AC INPUT ENTRY
(remove top cover before punching
hole(s). Remove rear cover to connect
wires to TB1; four M4 screws)
** AC WIRING ENTRY BOX HAS PRE-CUT 1/4-INCH DIA HOLES. USE A CHASSIS
PUNCH TOOL (e.g., GREENLEE) TO PUNCH DESIRED HOLE SIZE IN BOX.
Shown with rear panels removed
BOTTOM UPS AC ENTRY
(2-in. dia. hole)
TOP UPS AC INPUT ENTRY
0.25 in. (0.64 mm)
dia. pilot hole
(punch to desired size)
TB1
(TB1-1 closest to the right)
TB2, TB3