natus UltraPro S100, User Manual, Page: 60 / 88

UltraPro S100
4-4
September 13, 2018
Using UltraPro S100,
Study Menu vs Test
Menu
There are two basic approaches to selecting exams for testing: Test Menu or
Study Menu . Each is discussed in greater detail below.
Test menu
With Test Menu, exams are grouped by type; motor, sensory, F-Waves, etc.
When you start an exam, on the waveform screen, you can change to a different
exam by double-clicking the
Test Folder and then from a Select Protocol dialog,
choose the specific exam and side .
Study menu
In Study Menu, exams are typically grouped based on diagnosis, patient
complaint, or some other custom setup. When performing a study, while in the
waveform screen, you can select your next exam from the Study Exam in the
lower right center of the screen, which is independent of exam type. When done
in this fashion, there is no dialog box. A study can contain motor, sensory, F-
Wave, H-Reflex, needle EMG, etc.