natus UltraPro S100, User Manual, Page: 27 / 88

September 13, 2018 1-7
Introduction
Cleaning
All external parts of the assembly can be wiped down with the following:
Chemical contact will be limited to chemicals specified
below to clean the assembly only. Other chemicals may or may not affect the
device, but do not fall under tested chemicals for the assembly.
•
Water
•
Isopropyl Alcohol (70-90% concentration in water)
•
PDI SaniClothPlus #Q89702
•
HB Quat (3M)
•
Mild soap solution such as Basis, Cetaphil, Dove in water solution
•
Ethyl alcohol (70-90% concentration)
•
A solution of 1 part household bleach (5-6% concentrate sodium
hypocholorite) and 50 parts water.
Connecting the system components
Please refer to the UltraPro S100 Installation Guide for cabling instructions.
Entering commands
You enter commands, text or values and select functions by pressing a key on the
control panel or by typing a series of keys on the keyboard. If you have a pointing
device, such as a mouse or track ball, you perform these functions by pointing
and clicking on an item in the Function key area.