natus OLYMPIC SMART SCALE 50, Instruction Manual

Page: 23 / 64

OLYMPIC SMART SCALE Model 50/51 Instruction Manual 3-5
Operating the Smart Scale
2
Press
AVERAGE/UNLOCK
to unlock the display.
3
Press
AVERAGE/UNLOCK
to recalculate and display the patient’s weight.
Recalling the Last Locked Weight
If the Smart Scale is turned off or loses power, press
RECALL
to display the last
locked-in weight. The scale display will come on, display the last locked weight for
10 seconds, and then turn off.
Weighing the Next Patient
Before weighing the next patient, the scale display must show 0 . If the display is
locked ( LOCKED light illuminates), press
AVERAGE/UNLOCK
. The scale should
show
0
; if not, press
ZERO
.
Overload
If the load exceeds 55 lb (25 kg), the OVERLOAD light illuminates and blinks,
indicating that the weight on the scale platform is too heavy. Remove extra objects,
or the patient, from the scale.
NOTE
#
The weight can only be recalled when the display has turned off.
CAUTION
Always clean/disinfect the scale between patients.