natus Nicolet Viking EDX, User Manual

Page: 49 / 94

January 30, 2020 2-29
System Basics
Using the Acquisition Setup panel
Displaying the
Acquisition Set panel
1. To display the Acquisition Set panel, use either of the following methods:
a. Click Acquisition > Acquisition Setup .
b. From the Toolbar, click on Ch. , Low , or High .
Figure 1.
Figure 2.
Note: Changes made to the settings outlined at the left in Figure 2 will affect
all of the channels automatically.
2. Click on the Ch # tab you want to set.
3. Make your settings as desired.
4. Click
OK .