Natus® Brain Monitor &
Embla Dx Series™
User and Service Manual
38
Connecting the Natus Base Unit and Brain Monitor & Embla Dx Series
Breakout Boxes
The Base unit and Breakout Boxes can be interfaced with a quick and easy connection of the patient
tether cable. The connection on the Breakout and the Base unit are light gray for ease of connecting.
To Connect the Natus base unit to the Amplifier:
1.
Locate the
Patient Cable from Amplifier to Base
(p/n 013348) which was included with
your purchase and connect it to the Natus Base unit at the connection labeled with
(#1 on the image above).
2.
Connect the other end of the cable to the desired Amplifier at the connection labeled with
(#2 on the image above).
Removing the Connections
To remove the Cable Connections:
•
Grasp the connector, slide outwards to unlatch, and then remove the cable with a gentle pull.
