Natus® Brain Monitor &
Embla Dx Series™
User and Service Manual
32
Setting the IP Address
1.
Once the Natus base unit has been powered up, press and hold power button
for 3
seconds. The following user interface appears.
2.
Press the
Settings
button on the touchscreen to access the IP Configuration.
NOTE:
The amplifier supports both DHCP and static TCP/IP address configuration. Selecting
DHCP will allow the amplifier to receive TCP/IP addresses automatically from the DHCP server.
The NeuroWorks software can scan and find available amplifiers for acquisition.
3.
Select
On/Off
for the
Audio Alerts
.
4.
Select
DHCP/STATIC (or USB)
under the
Network settings
and make desired changes.