User and Service Manual
Natus® Brain Monitor &
Embla Dx Series™
31
Setup
Connections
The Brain Monitor & Embla Dx Series Amplifiers are designed to work with a Natus computer system
running Natus NeuroWorks/SleepWorks software.
1.
Confirm the base unit is mounted via the
Quick Disconnect Bracket
to either a system cart
or wall mount track.
2.
Connect the Natus base unit to the acquisition computer using a network or via USB. The
base unit can be connected to a standard switched gigabit network jack (recommended) or to
a secondary gigabit network interface card on the acquisition computer.
3.
Connect the power cable, base to breakout cable, patient event button, and any additional
accessories (XactTrace belts, cannula, thermistor, snoring sensor, pulse oximeter probe, DC
inputs cables etc.) as required.
NOTE:
Setup and Installation of the Brain Monitor & Embla Dx Series Amplifiers System should
be performed by Natus qualified personnel only.
