User and Service Manual
Natus® Brain Monitor &
Embla Dx Series™
27
Natus Base Unit
1
Power Button. Labeled with
.
2
Reserved for future use. Labeled with
.
3
Can be used to connect the Natus Base Unit directly to a PC and/or Laptop. Labeled with
.
4
Can be used to connect the Natus Base Unit to a system network. Labeled with
.
5
Ground equipotential terminal.
6
Connects to the Natus Base Unit to the mains power supply.
7
Fuse Compartment. Labeled above with:
Fuse: T1.6A/250V~80VA; 100-230VAC.
8
Labeled with
.
9
Can be used to connect DC signals from external devices. Labeled with DC1-DC12.
10
Photic Stimulator Connector. Labeled with .
11
Patient Event Button Connector. Labeled with .
12
Base to Breakout Main Cable Connector. Used to connect the base unit to the patient breakout
box. Labeled with
.
13
Reserved for future use.
