Information
July 6, 2020
2-7
Extending the mouse
holder tray
(Natus
ErgoJust LTM cart
only)
You can extend the mouse holder tray to use the mouse on the tray for the Natus ErgoJust LTM
cart.
NOTE
: Store the mouse in the mouse holder when not in use or transporting the cart
NOTE
: The Natus ErgoJust ICU cart system uses the keyboard with an integrated touchpad
mouse. A separate mouse is not required. The keyboard tray is equipped with an extendable work
tray.
Figure 1: Extending the mouse holder or work tray.
1. Grasp the mouse holder tray and gently pull outward to extend the tray.
Mounting the mouse
holder for left or right
handed mouse
operation
(Natus
ErgoJust LTM cart
only)
The mouse holder may be mounted on either the left or right side of the work surface for left or
right handed mouse operation.
1. Using a flat blade screwdriver, carefully pry the mouse holder tab (1) while pulling down
gently (2) on the mouse holder (Figure 1).
Figure 1: Removing the mouse holder (Natus ErgoJust LTM cart shown).
2. Slide the mouse tray full left or right as desired for left or right handed mouse operation.
3. Align the locking tab on the mouse holder with the mounting slot on the mouse tray and push
gently upwards until the locking tab snaps into place.
NOTE
: Store the mouse in the mouse holder when not in use and when transporting the cart.
Natus ErgoJust LTM cart work tray with
mouse holder
Natus ErgoJust ICU cart with work tray
