ErgoJust and ErgoJust ICU Cart Installation and Functionality Guide
3-18
August 22, 2017
Install the new basket
5. Insert the mounting tab on the right side of the basket into the mounting hole on the handle and
then push up on the left side of the basket (Figure 4).
Figure 4: Insert the right side mounting tab into the mounting hole and push the left side of the
basket upward.
6. Press in on the left side of the basket or carefully pry the left side of the basket while pushing
up on the bottom of the basket until the mounting tab slides into the mounting hole (Figure 5).
Figure 5: Pry the left side inward and push up the left side of the basket.
7. Bend the middle of the basket (
A
) slightly away from the handle and swing the bottom of the
basket (
B
) towards the cart until both basket mounting tabs snap into the two mounting holes
(Figure 6).
Figure 6: Seating the mounting tabs into the two rear mounting holes.