6
•
If using as a reading light:
•
Place of a flat surface at or above eye level depending on your desired
result/comfort.
•
Press the ON/OFF button, the light will turn on
•
Adjust the brightness by pressing the intensity button (2 modes)
•
To adjust the color, press the ON/OFF button again.
•
There are three color modes for specific times of day (morning, daylight, and
evening).
•
Note: Do not look directly into the lamp.
•
CAUTION: Avoid placing this lamp in areas that are exposed to direct sunlight or
close to heat-radiating products such as heaters. Do not place the lamp on top of
appliances that radiate heat.
Operation
•
Select a comfortable and level location to place your Sun Joy
•
Adjust the folding cover to your desired position:
•
Fold into a triangle on the front of the unit to angle the lamp downwards to use
as a reading lamp.
•
Fold into a triangle on the back of the unit to angle the lamp upwards to use as a
therapy lamp.
•
Unfold and lay the cover flat to protect your unit while transporting/not in use.
•
If using as a therapy lamp:
•
Place on a flat surface at or below eye level depending on your desired result/
comfort.
•
For best performance, place the lamp 12 inches (arm’s length) away from facial
profile but within 18 inches of your face.
•
Press the ON/OFF button located on the side of the unit, the light will turn on
•
To adjust the color, press the ON/OFF button again.
*Use the high setting of the daylight mode (10,000 LUX) when using the unit
for light therapy*
•
To use the optional timer, press the timer button to turn on. The default timer is
set at 30 minutes. Press the timer button again to adjust to 60 or 90 minutes, or
to turn the timer off. If the timer button is off, the SunJoy will continue to run as
long as it stays plugged in.
•
To adjust intensity, make sure the light is on. There are two modes, “bright” and
“dim”. Press the intensity button until desired intensity is selected.
Summary of Contents for Sun Joy F6060
Page 5: ...5 Key Definition ...
