manualshive.com logo in svg

Native Instruments Traktor Kontrol Z2, Manual

Share
Download
Native Instruments Traktor Kontrol Z2 Manual Download Page 26

4.

Press an empty (unlit) Cue/Sample Trigger button.

→

The button lights up green, to indicate that a loop is stored there.

Both the loop start point and the loop length are stored this way. When you trigger a stored

loop, you can change its current length while it is looping, but the actual markers will re-
main  unchanged.  If  you  want  to  change  the  actual  markers  (the  start  point  and  loop

length),  you  will  have  to  delete  the  loop  and  then  reset  it  with  the  desired  position  and

length with the Cue/Sample Trigger buttons. For more details about loops, see the TRAK-

TOR manual.

To delete a loop stored to a Cue/Sample Trigger button:

►

Press 

SHIFT

 and then the corresponding Cue/Sample Trigger button.

→

The button will now no longer be lit and can be used for another loop or cue point.

With TRAKTOR's new Flux mode, you can trigger loops / cue points while preserving the
track's phrasing. See 

↑

4.4, Flux Mode

 for further information on Flux mode and how it af-

fects cue points and loops.

You  can  change  the  behavior  of  the  Cue/Sample  Trigger  buttons'  secondary  functions  in
TRAKTOR's preferences. See also 

↑

5.4.5, Cue/Sample Trigger Section (1, 2, 3, 4)

.

4.3.4

Controlling Remix Decks

 

When the Deck Flavor is set to Remix Deck, the Cue/Sample Trigger buttons function as Sam-
ple Slot triggers and show the color of the focused Sample Cell within the Remix Deck.

You can change Deck Flavors within the TRAKTOR software by pressing on a Deck's Deck
letter and selecting your Deck Flavor of choice. Please refer to the TRAKTOR Manual for
further instructions.

When you load a Remix Deck, the top row of samples in the four Sample Slots will be control-
led by the Cue/Sample Trigger buttons. If the Deck is stopped when a Remix Deck is loaded,
hitting any of the four Cue/Sample Trigger buttons will trigger the Sample Slot and start the
Deck. Once the Deck is playing, repeatedly pressing the buttons will toggle the Mute state of
the Sample Slot on and off.
Triggering a Remix Deck and toggling mute/unmute:

Using the Z2 with TRAKTOR (TRAKTOR Mode)

Using the Cue/Sample Trigger Buttons

 

TRAKTOR KONTROL Z2 - Manual - 26

Summary of Contents for Traktor Kontrol Z2






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands