This instantly moves the Loop within the track by the selected Loop size.
Removing a Stored Loop
To remove a stored Loop from the Hotcue and from the track:
•
Press
SHIFT
and press a green lit Pad.
The Loop is removed from the Hotcue and from the track. The Pad is now unlit.
7.11. Playing with Flux Mode and Reverse Mode
Flux mode lets you jump to Cue Points and Loops without loosing the phrasing of your tracks. It is
a timeline-based transport technique that enables you to interact with TRAKTOR's transport con-
trols, and then immediately jump back to the position in the timeline where the track would have
been if the transport action had not been used. In other words, it is as if a second, virtual playhead
continues forwards in the track, while TRAKTOR loops or jumps to a Cue Point.
When you release the Loop or Cue Point, by releasing the relevant Pad with the Hotcue, playback
resumes at this playhead position. The longer you loop, the further ahead the playhead position
will move and therefore the further ahead playback will jump to when you release Pad. The virtual
Flux mode timeline is represented by a green playhead in the Waveform view.
An expansion to the Flux mode is the Reverse mode. When you enable Reverse mode while in
Flux mode, you can let the track playback reversely from the current playhead position. The sec-
ond, virtual playhead continues forwards in the track.
Enabling Flux Mode
To enable Flux mode for the selected Deck:
1.
Press the
FLX
button on the selected Deck.
Tutorials
58
Summary of Contents for TRAKTOR KONTROL S4
Page 1: ......
