13.4.3 Manually Adjusting Your Slices
In addition to the Detect, Split, Grid, and Manual modes that create Slices automatically (see
13.4.2, Adjusting the Slicing Settings
above), you can also adjust Slices manually us-
ing your mouse, the waveform display, and the various edit tools at your disposal.
You can directly adjust your Slices manually by selecting
Manual
in the
MODE
selector,
or start from MASCHINE’s proposed Slices as described in section
and fine-adjust these Slices manually — in that case the
MODE
se-
lector automatically switches to
Manual
.
3
4
1
2
5
Manually adjusting your Slices.
(1) Waveform display
Shows the selected Sample with a couple of spread vertical lines in the waveform: this is
where the Slices are going to be applied (i.e. cut).
Sampling and Sample Mapping
Slicing a Sample
MASCHINE 2 - Manual - 624
