Element
Description
Filter
Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in. Available values are off and on (default: off).
Center Freq
Adjusts the center frequency of the filter. Available values range in
kilohertz from 20.0 Hz to 20.0 kHz (default: 632.5 kHz).
On your controller the outputs available in the
SOURCE
parameter are labeled as in the
display of the
Source
selector described above.
For more information on how to use the side-chain input, please refer to section
10.1.3, Using the Side-Chain Input
.
Input Level Meter in the Limiter Panel (Plug-in Strip)
In the Plug-in Strip, the Limiter panel offers an extra feature not available in the Control area:
The
Threshold
fader (corresponding to the
Threshold
parameter of the
Main
page in the Control
area) provides a level meter for visual monitoring of the input level. By comparing this input
level with the position of the
Threshold
fader, you can easily see which parts of the signal will
be limited, and adjust the
Threshold
fader accordingly.
11.1.5 Maximizer
The Maximizer reduces the dynamics within the sound, making the overall sound louder. It is
similar to the Limiter, but it is specifically designed for increasing the perceived volume.
If this effect is used in a Sound or a Group, it also provides a Side-Chain Input page (in the
Control area and on your controller).
Effect Reference
Dynamics
MASCHINE 2 - Manual - 491
