Parameter
Description
Gain
Adjusts the input level of the side-chain signal fed into the Plug-in.
FILTER Section
Filter
Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in.
Center Freq
Adjusts the center frequency of the filter.
Width
Adjusts the bandwidth of the filter.
On your controller the outputs available in the
SOURCE
parameter are labeled as in the
display of the
Source
selector described above.
For more information on how to use the side-chain input, please refer to section
10.1.3, Using the Side-Chain Input
.
Input Level Meter in the Gate Panel (Plug-in Strip)
In the Plug-in Strip, the Gate panel offers an extra feature not available in the Control area:
The
Threshold
fader (corresponding to the
Threshold
parameter of the
Main
page in the Control
area) provides a level meter for visual monitoring of the input level. By comparing this input
level with the position of the
Threshold
fader, you can easily see you which parts of the signal
will pass through the Gate.
11.1.3 Transient Master
The Transient Master allows you to emphasize or attenuate the transients of your audio materi-
al by modifying the envelopes of every attack and sustain phase. For example, by increasing
the attacks of a snare or a kick, you can build powerful percussive sounds without running the
risk of damaging their natural sounding. Unlike other dynamic effects (compressors, limiters,
etc.), the Transient Master does not use the input signal level to decide when to come into ef-
Effect Reference
Dynamics
MASCHINE 2 - Manual - 486
