►
To remove the entire modulation for a knob, simply right-click (on Mac OS X: [Ctrl]+click)
its outer ring.
You can also create and edit modulation tracks directly in the Control Lane. See section
The Record Prepare Mode for more information.
6.4.3
Creating and Editing Modulation in the Control Lane
You can also create, select, and edit individual modulation points in the Modulation pane of the
Control Lane.
Displaying the Modulation Pane in the Control Lane
1.
To see and edit modulation for parameters of a Sound, click the desired Sound in the
Sound List (left of the Pattern Editor) and click the
SOUND
tab in the Control area.
2.
To see and edit modulation for parameters of a Group, click the desired Group in the
Group List (left of the Arranger) and click the
GROUP
tab in the Control area.
3.
If the Control Lane is not visible at the bottom of the Pattern Editor, click the up-pointing
arrow in the bottom left corner of the Pattern Editor to show it.
4.
Click the little bar icon left of the Control Lane to display the Modulation pane.
→
The Modulation pane appears.
Working with Patterns
Recording and Editing Modulation
MASCHINE 2 - Manual - 254
