Native Instruments MASCHINE MK3, Manual

Page: 554 / 891

Element Description
SCALE Section
Velocity Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
10.3.5 Snare – Airy
The Airy snare is an acoustic snare drum model that provides a realistic metallic snare sound.
The two modes available on its
Advanced page relate to different tension levels of the snare
wires, which allows for a wide range of snares that will cut through very well into a mix.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See
↑
9.4, The Plug-in Strip for more information on this.
Main Page
Element Description
MAIN Section
Engine Selects the engine used in the Snare Plug-in. If you change this
setting, please refer to
↑
10.3, The Snares .
Tune Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 52.00 to
76.00. The default value is 64.00. For more details see
↑
10.1.5,
Pitch Range, Tuning, and MIDI Notes .
Using the Drumsynths
The Snares
MASCHINE - Manual - 554