Native Instruments MASCHINE MK3, Manual, Page: 389 / 891

Share

Page: 389 / 891

Native Instruments MASCHINE MK3 Manual Download Page 389

7.5.3

Creating and Editing Modulation in the Control Lane

You can also create, select, and edit individual modulation points in the Modulation pane of the

Control Lane.

Displaying the Modulation Pane in the Control Lane

1.

To see and edit modulation for parameters of a Sound, click the desired Sound in the
Sound List (left of the Pattern Editor) and click the

SOUND

tab in the Control area.

2.

To see and edit modulation for parameters of a Group, click the desired Group in the
Group List (left of the Arranger) and click the

GROUP

tab in the Control area.

3.

If the Control Lane is not visible at the bottom of the Pattern Editor, click the up-pointing
arrow in the bottom left corner of the Pattern Editor to show it.

4.

Click the little bar icon left of the Control Lane to display the Modulation pane.

→

The Modulation pane appears.

The Modulation pane showing the modulation track for the Decay parameter (see on the left).

The Modulation pane contains following elements:

Working with Patterns

Recording and Editing Modulation

MASCHINE - Manual - 389

«
...
387
388
389
390
391
...
»

Summary of Contents for MASCHINE MK3




























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments