manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 488

For example, if you have a drum roll, a flam or any custom sequence happening right before a beat,
this allows you to move the whole sequence to another beat with a perfect timing while keeping its

feel untouched.

Dragging vs. Nudging

Dragging with the mouse is different from the Nudge command on your controller:

▪

Whereas dragging is based on the Step Grid, the Nudge command is based on the Nudge

Grid (see section 

↑

11.1.7, Adjusting the Step Grid and the Nudge Grid

).

▪

Whereas you can drag notes beyond the end of the Pattern, nudged notes reaching the end
of the Pattern are automatically sent to the beginning of the Pattern.

▪

If a note is not on a Step Grid division, dragging it with Step Grid enabled will alternate
between snapping to Step Grid divisions and snapping to positions that preserve its original
offset with the Step Grid (see quantization rule above).

In the software the Nudge command is not available with your mouse but via a keyboard short-
cut:

►

Press  [Alt]  +  the  left/right  cursor  key  on  your  computer  keyboard  to  nudge  the  selected
notes by one Nudge Grid division. If no event is selected, all events in the Pattern will be
affected.

See the hardware section below for more information on the Nudge command.

Nudge Events and Notes

Nudging allows you to shift selected events by the Nudge Grid resolution (the events’ offsets
relative to the Nudge Grid are preserved).

The Nudge Grid is based on the Step Grid and allows you to define even smaller jumps than the

Step  Grid  divisions  to  move  your  events  more  precisely.  See  section 

↑

11.1.7,  Adjusting  the  Step

Grid and the Nudge Grid

 for more details.

►

Press 

SHIFT

 + pad 

7

 (

NUDGE <

) to nudge the selected events to the left, or 

SHIFT

 + pad

8

 (

NUDGE >

) to nudge the selected events to the right. If nothing is selected, all event/

notes in the Pattern will be affected.

Working with Patterns

Editing Events

 

MASCHINE MIKRO - Manual - 488

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands