Native Instruments Maschine Mikro MK2 Manual Download Page 112

Page: 112 / 928

Setting

Description

Sound

Default MIDI Input Mode

MASCHINE allows you to play your Sound(s) via MIDI notes, for

example, from a MIDI keyboard. By default and without any
configuration, incoming MIDI notes on any MIDI port and any

MIDI channel will trigger the pitch of the focused Sound. In
addition, you can select that a Sound receives no MIDI input,

and also define the default setting for MIDI input by selecting
the

Default MIDI Input Mode

preference.

Select one of the following MIDI input mode options from the
drop-down menu:

Focus

: MIDI input from any connected controller can be used to

trigger the focused (selected) Sound slot.

None

: The selected Sound will not receive MIDI data.

3.6.5

Preferences – Library Page

The

Library

page allows you to edit the locations of all MASCHINE library files (both factory

and user) that appear in the

LIBRARY

pane of the Browser.

The

LIBRARY

pane of the Browser is described in section

↑

4.2, Searching and Loading Files from

the Library

►

To display the

Library

page click the

Library

tab on the left of the

Preferences

panel.

At the top of the page, the

Factory

and

User

buttons allow you to switch between the

Factory

pane and the

User

pane.

Factory Pane

►

To display the

Factory

pane, click the

Factory

button at the top of the

Library

page.

Basic Concepts

Preferences

MASCHINE MIKRO - Manual - 112

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Maschine Mikro MK2

Reviews:

Brands by name

Popular brands

Native Instruments Maschine Mikro MK2, Manual

Search results

Summary of Contents for Maschine Mikro MK2

Reviews:

Brands by name

Popular brands