manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 102

Setting

Description

Usage Data Tracking

 

Allow usage data tracking

Here you can select to enable or disable Usage Data Tracking.
Usage Data Tracking technology enables MASCHINE to

automatically track anonymous usage data that you can choose

to share with us.
All users should keep Data Tracking enabled as it provides a
valuable tool for understanding the performance of Native
Instruments applications when they are used in real life
situations. The data sent to Native Instruments is one hundred
percent anonymous and will not affect performance.
For more detailed information about Usage Data Tracking,
please refer to the following Knowledge Base article on the
Native Instruments website:

https://support.native-instruments.com/hc/en-us/articles/
209545029

3.6.2

Preferences – Audio Page

 

The 

Audio

 page holds settings related to your audio interface.

The 

Routings

 section allows you to configure the connections between the virtual inputs/out-

puts of MASCHINE and the physical inputs/outputs of your audio interface.

►

To display the 

Audio

 page, click the 

Audio

 tab on the left of the 

Preferences

 panel.

Basic Concepts

Preferences

 

MASCHINE MIKRO - Manual - 102

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands