manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 45

Setting or command

Description

PLUG-IN

Lists all available plug-ins from the directories specified in the LOCATIONS sec-
tion (see above). This includes all enabled or disabled 32-bit plug-ins, when MA-

SCHINE is running in 32-bit mode or otherwise all enabled or disabled 64-bit

plug-ins, when MASCHINE is running in 64-bit mode.

DEFAULT CONFIG

For each plug-in you can set a default Module preset, which will be loaded with

this plug-in when you load it from the Module list on the controller or the Module
menu of a Module slot. Use the 

SELECT

 button to set the default Module preset.

The default Module preset can also be set via the Module menu (

Save As De-

fault…

). If no default is set here, the parameters of this plug-in will be auto-map-

ped when loading it into a Module slot.

RESCAN

If you have changed the content of the selected directory (such as installed or re-
moved plug-ins), you should rescan your plug-in directories in order to keep the
list of available plug-ins up to date. Clicking 

RESCAN

 will check the integrity of

your plug-ins and allow you to automatically detect plug-ins that were added or
removed, or deselect any plug-ins that are not working correctly for any reason.

CLEAR

This removes the default Module preset for the selected plug-in.

SELECT

This allows you to select a default Module preset for the selected plug-in, which
will be loaded with this plug-in when you load it from the Module list on the con-
troller or the Module menu of a Module slot..

Scan at startup

Check this box to let MASCHINE automatically scan for new plug-ins on startup.
Please be aware these scans increase startup times. If you leave this box un-
checked, be sure to perform a manual scan using the 

RESCAN

 button when new

plug-ins are installed or plug-ins are removed.

64 BIT / 32 BIT Section

Displays  32-bit/64-bit  plug-ins  that  are  identified  by  MASCHINE  but  cannot  be  used  in  the
current bit mode.

To  check  which  bit  mode  you  are  currently  running,  open  the  About  screen  from  MA-
SCHINE’s 

Help

 menu and see the 

Mode

 section in the upper right.

Basic Concepts

Preferences

 

MASCHINE MIKRO MK2 - Manual - 45

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands