manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 225

The Freq Shifter in the software.

Parameter

Description

Frequency

 

Coarse

This is used to define the basic frequency of the Freq Shifter.

Fine

Fine-tune the frequency here.

Feedback

 

Amount

Adjusts the amount of output signal fed back into the input. Increasing
this parameter will increase the intensity of the effect.

Stereo

This parameter widens the stereo field of the effect.

Output

 

Invert

Inverts the settings of the Freq Shifter.

Mix

Mix

 lets you adjust the amount of the effect in relation to the dry original

audio signal.

The Freq Shifter on the controller.

8.3.5

Phaser

 

Classic phaser with LFO and envelope modulation.

Effect Reference

Modulation Effects

 

MASCHINE MIKRO MK2 - Manual - 225

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands