Erasing Events or Notes while Playing
If the sequencer is currently playing, you can selectively erase events/notes at the play posi-
tion:
►
While the Pattern is playing, hold
ERASE
+ the desired pad to progressively delete the
events for that Sound (if pads are in Group mode) or the notes at that pitch for the se-
lected Sound (if pads are in Keyboard mode) that are located at the current play position.
→
As long as you hold the pad, the corresponding events/notes are deleted as the play posi-
tion moves on.
You can use this to selectively erase notes at a particular place in the Pattern.
This might take some time getting used to, especially when the tempo is very fast, but you
can always use undo/redo (
SHIFT
+ pad
1
,
SHIFT
+ pad
2
) to get back to where you were
before.
6.2.3
Copy and Paste Events/Notes
You can also copy and paste selected events/notes:
1.
To copy the selected events/notes, press
SHIFT
+ pad
11
(
COPY
)
2.
To paste them, press
SHIFT
+ pad
12
(
PASTE
).
→
The events/notes will be pasted according to the Step Grid resolution, shifted one step to
the right. If nothing is selected, all event/notes in the Pattern will be affected.
You can also copy events/notes from one Pattern to another: to do this, copy the selected
events/notes, select the Pattern you want to copy them to and then paste them.
6.2.4
Nudge
Nudge allows you to shift selected events/notes by the Step Grid resolution.
►
Press
SHIFT
+ pad
7
(
< NUDGE
) to move the selected events/notes to the left, or
SHIFT
+ pad
8
(
NUDGE >
) to move the selected events/notes to the right. If nothing is
selected, all event/notes in the Pattern will be affected.
Working with Patterns (Controller)
Editing Patterns
MASCHINE MIKRO MK2 - Manual - 183
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
