4.
Press Button 7 to select
MCR
(Macro).
→
You can now adjust the parameters you assigned in the MASCHINE software using Knobs
1–8.
5.1.4
Group – Output Properties (OUT)
The Group’s Output Properties allow you to route the audio output of your Group (that is, the
sum of all its Sounds’ outputs) and define auxiliary sends (or “Aux sends”). Aux sends allow
you to send a definable amount of your Group’s audio output to Sounds in other Groups for
further processing. Read the section
to get to know more about
how to set up a classic send effect.
Please refer to section
4.4.1, Selecting a Set of Properties
to know how to access the Output
Properties of a Group.
Page 1: Main, Aux 1 and Aux 2
Page 1 of 2 from the Group’s Output Properties on the controller.
Page 1 of 2 from the Group’s Output Properties in the software.
Working with Groups
The Group Properties
MASCHINE MIKRO MK2 - Manual - 149
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
