manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Getting Started

Share
Download
Native Instruments Maschine Mikro MK2 Getting Started Download Page 109

2.

Press 

F3

 to select 

STEP

 and access the Step Grid’s resolution setting. The resolution is

indicated at the bottom of the display.

3.

Turn the Control encoder to adjust the value.

7.3

Saving Your Project

 

Again, it is recommended to regularly save your work. You can then open another Project or
close MASCHINE and take a break. Your tutorial Project will be recalled as it was the next time
you open it.
To save your Project in the software:

►

Press [Ctrl] + [S] ([command] + [S] on macOS) to save your Project.

To save your Project on the controller:

►

Press 

SHIFT

 + 

SAMPLING

 to save your Project.

7.4

To Sum Up…

 

In this tutorial, you have learned to:

▪

Switch the controller to Step mode.

▪

Use Step mode to record Patterns.

▪

Record modulation in Step mode.

▪

Adjust the Step Grid resolution.

Creating Beats with the Step Sequencer

Saving Your Project

 

MASCHINE MIKRO - Getting Started - 109

Summary of Contents for Maschine Mikro MK2






















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands