12.3 Switching Parameter Pages
Many Instruments are equipped with much more than eight parameters. To provide quick ac-
cess to additional parameters, the Page buttons (left and right arrows) to the left of the Control
section let you skip through parameter pages. This remaps the knobs to a different set of In-
strument parameters.
►
To skip to another parameter page and remap the eight knobs to a new set of controls,
press the Page buttons left or right. The
PAGE
display indicates the current parameter
page, and the total number of available pages for the loaded Instrument.
12.4 Customizing Parameter Mappings
If you want to customize the parameter mapping for an Instrument’s Preset file, you have to
enable the Edit mode of the Plug-in panel.
►
To enable or disable the Plug-in panel’s Edit mode, click on the Edit mode button in the
upper right corner.
The Edit mode allows you to:
▪
Add, delete, and replace parameters in the mapping.
▪
Learn parameters to controls.
▪
Rename controls.
▪
Add pages to the Control section, or delete existing pages.
Controlling Instrument Parameters
Switching Parameter Pages
KOMPLETE KONTROL - Manual - 140
Summary of Contents for komplete kontrol s series
Page 1: ...MANUAL...
