6.4.2
Knobs Display Mode
The Knobs display mode is probably the one you will use the most. In this mode, the displays
show the currently loaded Knob Page, with its eight button assignments on the top row and its
eight knob assignments on the bottom row:
The Knobs display mode mirrors the currently loaded Knob Page.
This display mode allows you to see which MIDI message is currently assigned to each control
element in the loaded Knob Page. In this mode, the 16 control elements around the displays
(Buttons 1–8 above and Knobs 1–8 below) trigger the MIDI messages assigned to them.
Each field mirrors the Label Field as defined in the Inspector’s
Assign
pane for the correspond-
ing control element: the name you defined there appears here — if you haven’t defined any
name for that control element yet, its label is simply its assigned MIDI message.
In the lower row, the displays additionally show the current value for each Knob. These values
can be displayed in two views: either via numerical values (like in the picture above), or via
small bars:
The Knobs display mode with bars instead of numerical values.
You can switch between the two views by holding the SHIFT button and turning Knob 5:
1.
Hold SHIFT (thus getting to the switching screen explained in
You can see the option “
SHOW BARS
” or “
SHOW VALUES
” above Knob 5 (depending on which
view is currently selected).
2.
Turn Knob 5 to select the desired view.
3.
Release SHIFT.
Using Your MASCHINE MK2 Controller
The Displays
CONTROLLER EDITOR - Manual - 80
Summary of Contents for komplete kontrol s series
Page 1: ......
