![Native Instruments komplete kontrol s series Manual Download Page 248](http://html1.mh-extra.com/html/native-instruments/komplete-kontrol-s-series/komplete-kontrol-s-series_manual_3414123248.webp)
23.4.1 Visual Feedback on the Displays
The nine displays on your keyboard provide following information:
▪
Display 1 (leftmost display) shows:
◦
Top row: [current Page number] / [total number of Pages].
◦
Bottom row: name of the loaded Template.
▪
Display 2–9 (below Knobs 1–8) show the name (label) of the assignment for the Knob
above. When you touch a Knob, its associated display shows the current value of that as-
signment for a few moments, before turning back to the assignment name. Additionally, a
little bar at the top of each display provides an overview of the current value for each Knob.
If a Knob is not assigned, the display underneath is off.
Depending on the assignment properties for each of the Knobs, the bar at the top of each dis-
play can either fill from left to right (unipolar) or from the middle position (bipolar) — this sec-
ond setting can be useful for some types of controls (e.g. a stereo balance). This only affects
the value/bar shown on the displays—the real MIDI values will be in the range defined in the
Inspector’s
Assign
pane anyway. Please refer to section
25.6.8, Assignments for Analog En-
for more information on this.
23.4.2 Visual Feedback on the Light Guide
Right above the keys of your KOMPLETE KONTROL S-SERIES keyboard, the LEDs of the
Light Guide provide a useful and intuitive feedback on the current assignments for your keys.
Each LED describes the current state of the key below:
▪
If the key is disabled (i.e. controlling a key of a disabled Key Zone), its LED is off.
▪
If the key is enabled (i.e. controlling a key of an enabled Key Zone), its LED takes the color
of the Key Zone:
◦
When the key is unpressed its LED is dim lit.
◦
When the key is pressed its LED is fully lit.
Note that the assignments for your keys change as you shift your keyboard up or down along
the entire keybed via the OCT-/OCT+ buttons—the Light Guide instantly follows these changes
and keeps you informed on the new MIDI notes triggered by your keys.
Using Your KOMPLETE KONTROL S-SERIES Keyboard
Visual Feedback on Your Keyboard
CONTROLLER EDITOR - Manual - 248
Summary of Contents for komplete kontrol s series
Page 1: ......