1.
Use Knob 5 to scroll through the list and find the Template you wish to load.
2.
When you have made your selection, press Button 6 (
LOAD
) to load the selected Template.
As with the Pages display mode, this functionality is already available in other ways: in the
Controller Editor, you can use the Template list (in the Inspector’s
Templates
pane), and on
the MASCHINE STUDIO controller you have the Page buttons at your disposal. The Templates
display mode allows you a greater control over the Template selection from your controller for
the reasons already explained in the previous section for the Pages display mode.
When you reach the end of the list, you can choose whether the selection has to jump to
the other list end or stay on this last item. This can be set in
Preferences > General >
Wrap Template and Page Lists
.
9.4.7
Monitor Display Mode
The Monitor display mode provides you with useful information about the MIDI data sent by
your MASCHINE STUDIO controller.
The Monitor display mode provides information about the MIDI data sent by your MASCHINE STUDIO controller.
The left display shows the usual information about the current Template and Pages.
The right display shows more information on the last MIDI message sent:
▪
The first row (
Control
) indicates the last control element that you actuated.
▪
If the last actuated element is
not
a pad, the second row (
Event
) shows the details of the
corresponding MIDI message that was sent.
Using Your MASCHINE STUDIO Controller
The Displays
CONTROLLER EDITOR - Manual - 125
Summary of Contents for komplete kontrol s series
Page 1: ......
