Actually, this functionality is already available in many ways: in the Controller Editor, you can
use the Knob Page menu (in the Hardware area) or the
Knob Pages
list (in the Inspector’s
Pages
pane), and on the MASCHINE STUDIO controller you have the Page buttons at your dis-
posal. But the Pages display mode allows you a greater control over Page selection from the
MASCHINE STUDIO controller:
▪
Unlike using the
Knob Pages
list, you don’t have to open the Controller Editor to switch to
another Page.
▪
When using the Pages display mode, you can choose the next page to be loaded, even if
it’s not the one right after/before the one currently loaded. You can check its name to re-
member its assignments, and you can scroll the lists of all Pages to find the page you
want.
When you reach the end of the list, you can choose whether the selection has to jump to
the other list end or stay on this last item. This can be set in
Preferences > General >
Wrap Template and Page Lists
.
9.4.6
Templates Display Mode
The Templates display mode allows you to switch between Templates.
The Templates display mode allows you to switch between Templates.
On the left display, you find the same general information about the Template currently load-
ed.
On the right display, you see the list of your Templates, as defined in the Inspector’s
Tem-
plates
pane.
Using Your MASCHINE STUDIO Controller
The Displays
CONTROLLER EDITOR - Manual - 124
Summary of Contents for komplete kontrol s series
Page 1: ......
