9.3.1
Buttons
Basically, each button on your controller can have three states:
▪
Not assigned.
▪
Assigned, in Off state.
▪
Assigned, in On state.
The following paragraphs describe how the LED under each button keeps you informed on the
button states.
Single-Color Buttons
For all buttons except the Group buttons, the LEDs can have three states: off, dimmed and
bright. All are white except for the PLAY button (green) the REC button (red) and the IN (1-4)
buttons (blue). The LED states directly indicate the button states:
Button State
LED State
Not assigned
Off
Assigned – Off state
Dimmed
Assigned – On state
Bright
For buttons in Increment mode, the Off state corresponds to the zero value, while the
On state corresponds to a value greater than zero. See section
for more information on the various button modes.
Multicolor Buttons
The eight Group buttons of your controller are equipped with RGB LEDs. This by far extends
the monitoring possibilities of these control elements. Their lighting behavior directly depends
on whether the Pad Pages are enabled or not.
▪
Pad Pages enabled: Each Group button mirrors the color defined for its Pad Page (the
Color
setting for Pad Pages is described in
). All Group buttons are dimmed
except the button corresponding to the selected Pad Page.
Using Your MASCHINE STUDIO Controller
Visual Feedback on Your Controller
CONTROLLER EDITOR - Manual - 115
Summary of Contents for komplete kontrol s series
Page 1: ......
