The
VOLUME
control lowers/increases the output level of the monitor signal.
(3) Headphones section: The
PHONES
socket is for plugging in headphones with a 1/4" TRS
jack.
The
VOLUME
control lowers/increases the output signal of the headphones. The toggle switch
1/2
and
3/4
allows you to determine which output is monitored by the headphones.
4.2
Rear Panel
The rear panel of the KOMPLETE AUDIO 6.
(1) Phantom power button (
48V
): The phantom power button supplies 48V to condenser micro-
phones, which need this DC voltage to power their active electrical circuitry. This feature elimi-
nates the need for direct boxes or other additional hardware when using a condenser micro-
phone.
Be aware that phantom power can cause serious damage to ribbon microphones. Check
your microphone's manual to see whether it is safe to use phantom power on it. If it
isn't, make sure to disable phantom power on the interface before connecting: Switch
the
48V
phantom power button on the device's rear panel off. The
48V
LED on the devi-
ce's top panel stops lighting orange when phantom power is disabled.
The Hardware in Detail
Rear Panel
KOMPLETE AUDIO 6 - Manual - 18
Summary of Contents for Komplete Audio 6
Page 1: ...MANUAL ...
