![background image](http://html1.mh-extra.com/html/national/tessera-hgt-adj-desk/tessera-hgt-adj-desk_assembly-instruction_3381553005.webp)
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Assembly Instruction
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
3206401
Rev,
-
TESSERA HGT. ADJ.
DESK
Figure M
Figure L
5A
(For L Unit Installation)
Return to
Tessera Return Install AI
Step 9
(For Desk Unit Only Installation)
The control box and power supply will need to be shifted to the opposite side
to allow for the power supply cord to run down the repositioned wire
manager. Remove fasteners, re
-
position, and reinstall power supply bracket,
control box, and handset to underside of worksurface reusing original
fasteners. See right mount (Figure L) and left mount (Figure M) layouts below
for reference. Positions are approximate.
6A
Reconnect mechanism cables to control box.
7A
Return to Step 7