Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Figure D
Fierce
™ Assembly Instruct
ion
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part #
3216439
Rev,
A
Printed in U.S.A
© 2013 Kimball International, Inc.
Insert 5 casters into the plastic base as shown in Figure D.
4
Figure E
Orient the gas lift cylinder as shown and insert the larger end of the
cylinder into the hole in the center of the base. Figure E.
5
Carefully position the seat assembly over the gas lift cylinder, aligning the
hole in the seat control with the top, smaller end of the cylinder. Press
the seat assembly onto the cylinder then sit on the seat to completely
mate the components together. While seated, actuate height control lever
and remove weight from chair to adjust chair up to comfortable sitting height
as shown in Figure F.
6
Figure
F
