National Vendors shoppertron 431, Operator'S Manual, Page: 26 / 74

Shoppertron
TM
Operator’s Guide
July, 2003 Page 22 4310114
INITIAL SETUP OF NON-STANDARD BILL
VALIDATOR
1. Connect the bill validator, and follow the steps in "Select Bill Validator", to
select
MDB.1.2.5.10.20
in the bill validator selection screens.
MDB.=
<*> will not
be an option yet. Exit the bill validator setup by pressing . Bill
information is now collected from the validator.
2. Press , then press until
MDB.=
<*> displays.
3. Press .
1. 1.00 ON
will display. The first number (
1.
) indicates bill
validator channel 1, the
1.00
is the bill denomination, and
ON
indicates that
the validator will accept $1.00 bills.
4. Press to toggle the bill acceptance
ON
or
OFF
.
5. Press and to scroll through the list of other denominations
and to set them to
ON
or
OFF
.
6. Press to move up to the top level screen.
NOTE
If a denomination does not display in the scroll list of available
denominations, check the binary switch settings for the valida-
tor. If the binary switch for a given denomination is set to “off”, it
will not display in the list of denominations.
7. CONTINUE.
1.1.00 ON
1. = Bill validator channel 1, each bill has its own channel
1.00 = Bill value
ON = $1.00 bill will be accepted
1.1.00 OFF
OFF = $1.00 bill will not be accepted
TKN
Token bills (same as coupon bills)