Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Karid
™
Assembly Instruc
tion
Required Tools
•
4mm Hex Key Wrench
(Included)
Package Contents
Qty.
3
•
Arm/Back frame
assembly
•
Aluminum
base
•
Gas lift cylinder
•
Seat
/
Control
assembly
Product Line
Karid
™
Conference Chair
1
Assemble units as described herein only. All screws and bolts
must be tightened securely and checked periodically after
assembly. Failure to assemble or to secure parts properly may
result in assembly failure and personal injury.
Figure A
•
Hardware Kit:
•
M8x16mm
round
head bolts with
flat washers
•
Hex Key Wrench
1
!
•
Set of five casters
1
1
1
1
1
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part #
3474908
Rev ,
A
Printed in U.S.A
©
202
2
Kimball International, Inc.
I
nsert 5 casters into the
aluminum
base as shown in Figure
A
.
Figure
B
2
Orient the gas lift cylinder as shown and insert the larger end of
the cylinder into the hole in the center of the base. Figure B.
