Chapter 1 Introduction
National Instruments Corporation
1-5
VXI-MIO Series User Manual
Figure 1-1.
The Relationship between the Programming Environment, Your
Instrument Driver, and Your VXI-DAQ Hardware
Optional Equipment
National Instruments offers a variety of products to use with your
VXI-MIO Series module, including cables, connector blocks, and other
accessories, as follows:
•
Cables and cable assemblies, shielded and ribbon
•
Connector blocks
•
SCXI modules and accessories for isolating, amplifying, exciting,
and multiplexing signals for relays and analog output. With SCXI
you can condition and acquire up to 3072 channels.
•
Low channel count signal conditioning modules, boards, and
accessories, including conditioning for strain gauges and RTDs,
simultaneous sample and hold, and relays
For more specific information about these products, refer to your
National Instruments catalogue or call the office nearest you.
LabVIEW or
LabWindows/CVI
VXI
plug&play
Instrument Driver
NI-DAQ Driver Software
VISA
VXI-DAQ Hardware
Other Application
Development Environments
