160-Pin Cable Installation Instructions
|
© National Instruments
|
21
SH160DIN-BARE WIRE-2A Cable
The SH160DIN-BARE WIRE-2A cable is recommended for connecting the NI 252x or the
NI 2510 to your system if termination with a connector other than a 50-pin female D-SUB or
160-Pin DIN connector is required. One end of the cable terminates with a 160-Pin DIN
connector. The other end of the cable has eight bundles of unterminated, tinned, and stripped
wires.
Use the pinouts and the pin assignments listed in Tables 6 through 13 to determine how to
connect signals to your application.
Note
The first color listed in the Bare Wire Color column of Tables 6 through 13 is
the primary color of the wire. The second color listed is the stripe color.
Table 6.
Pin Assignment for SH160DIN-BARE WIRE-2A Cable Leg P1
Cable Leg P1
Bare Wire
Color
NI PXI-
2520
NI PXI-
2521
NI PXI-
2522
NI PXI-
2523
NI PXI-
2510
Interface
Connector
Pin
BLACK
COM 7
CH 2+
NO 5
NO 3+
CH 7
A29
BROWN
CH 7
CH 2-
COM 5
NO 3-
CH 6
B29
RED
COM 8
CH 3+
NC 5
NO 4+
CH 5
C29
ORANGE
CH 8
CH 3-
NO 8
NO 4-
CH 4
D29
YELLOW
CH 9
CH 4-
NO 9
COM 0-
A3
E29
GREEN
COM 5
COM 2+
NO 2
NC 1+
DUT 7
A30
BLUE
CH 5
COM 2-
COM 2
NC 1-
DUT 6
B30
PURPLE
COM 6
COM 3+
NC 2
NC 2+
DUT 5
C30
GRAY
CH 6
COM 3-
NC 3
NC 2-
DUT 4
D30
WHITE
COM 9
CH 4+
NC 4
COM 0+
A2
E30
PINK
COM 2
CH 0+
NO 1
COM 1+
CH 3
A31
LIGHT
GREEN
CH 2
CH 0-
COM 1
COM 1-
CH 2
B31
BLACK/
WHITE
COM 3
CH 1+
NC 1
COM 2+
CH 1
C31
BROWN/
WHITE
CH 3
CH 1-
COM 3
COM 2-
CH 0
D31
RED/
WHITE
CH 4
COM 4-
COM 4
NO 0-
A1
E31