Chapter 1
Installing and Configuring the SCXI-119X
©
National Instruments Corporation
1-13
Figure 1-3.
Removing the SCXI-119
X
Removing the SCXI-119
X
from Measurement & Automation Explorer
To remove a module from Measurement & Automation Explorer, complete
the following steps:
1.
Double-click the Measurement & Automation Explorer icon on
your PC desktop.
2.
Display the list of installed devices and interfaces by clicking the +
next to Devices and Interfaces.
3.
Locate the chassis in the list of installed devices. Display the list of
modules in the chassis by clicking the + next to Chassis.
4.
Right-click on the module or chassis you want to delete and select
Delete.
5.
You will be presented a confirmation window. Click Yes to continue
deleting the module or chassis or No to cancel this action.
1
SCXI Chassis Power Switch
2
SCXI Chassis
3
SCXI-119
X
(SCXI-1191 Shown)
4
SCXI Module Thumbscrews
®
MAINFRAME
SCXI
3
4
1
2